LED drivers „Made in Germany“

FRIWOs LED Product Range

Dimmable power in small housings

Reliable LED drivers for smallest designs: served by FRIWO's LT line and power range of 10 - 100 W from the standard portfolio. With extremely compact cross-sections of 30 x 21 mm (drivers with an output of 10 to 60 W) as well as 30 x 24 mm (80 W and 100 W output), the drivers can be integrated in very narrow lamp profile.

For dimming FRIWO offers solutions with a small cross-section of 30 x 21 mm. Depending on the operating mode, constant current (CC) or constant voltage (CV),  the standard portfolio offers two different solutions: In CC mode the drivers can be operated in combination with the light control box LS12/100 DPA (linear current control). For CV mode the DIMMbox (PWM dimming) is recommended. Both systems can be controlled by DALI, switch-dim and 1 - 10 V.

In accordance with EN61000-3-2 all LED drivers with a power of >25W come with a power factor correction (PFC) which adjusts the units to a power factor of at least 0.95. All LED drivers of the FRIWO portfolio meet the safety requirements of EN61347-1 and EN61347-2-13. In addition, they are protected against overvoltage, overcurrent and short circuit.

Due to the simple installation of the optional protective cap the units meet the requirements of safety class IP20. For the use in damp environments three potted voltage alternatives of unit LT40 (40 W) are available in IP67.

All of this in accordance with the quality standard "Made in Germany".